Every Type of Mold in One Place: The Mold Types SMP Makes
A summary of the 4 mold types SMP makes, what each one suits best, how the mold making process works and how to choose the right mold.
Introduction
Whether it is a water bottle, a packaging tray, an electronics cover or an automotive part, every part starts with a mold. The quality of the mold sets the accuracy of the part, the speed of production and the cost per part over the long run.
Content
A Good Mold Is Where a Good Product Begins
Whether it is a water bottle, a packaging tray, an electronics cover or an automotive part, every part starts with a mold. The quality of the mold sets the accuracy of the part, the speed of production and the cost per part over the long run.
Somporn Mould and Part Limited Partnership (SMP) is a Thai maker of molds and high-precision turned and milled parts, based in Samut Prakan. We design and make every type of mold in one place. This article walks you through each type of mold and the work it suits best. See all our services at Our services.
1. Plastic Injection Mold
Injection molds suit plastic parts that need complex shapes, accurate sizes and high volumes. Molten plastic is injected into the mold cavity under high pressure, then left to cool until the part matches the design. Learn more at Plastic injection mold.
Example work: bottle caps, electronics covers, automotive parts, appliance parts and medical device parts
Strengths: consistent parts every time, fast production and low cost per part at high volumes
Watch out for: the design of the runner system, the cooling system and part ejection, which directly affect cycle time and surface quality
Injection molds come as single cavity molds for large parts or small runs, and multi-cavity molds that make several parts per cycle for high volumes. A hot runner system can also be used to cut plastic waste and shorten the cycle. Choosing a structure that matches your production volume from the start gives you the best return on your investment. See examples by industry at Plastic injection molding, Automotive Parts and Medical Parts.
2. Vacuum Forming Mold
Vacuum forming molds shape plastic sheet. The sheet is heated until soft, then vacuum suction pulls it tight against the mold surface. They suit thin-walled packaging and large parts. Learn more at Vacuum mold.
Example work: food trays, part trays for production lines, clear blister packaging and clamshell plastic boxes
Strengths: lower mold cost than injection molds, short lead time and easy design changes
Watch out for: the position of the vacuum holes, draft angles and part depth, so the wall thickness stays even
Vacuum forming molds can be made from aluminum for real production, which cools well and lasts long, or from other materials for prototypes and small runs. This makes them a good choice for businesses that want to test the market first or change their packaging often. See examples at Food Packaging.
3. Blow Mold
Blow molds make hollow containers. Air is blown into molten plastic that has been formed into a tube or preform, so it expands against the mold walls. They are at the heart of the bottle and liquid packaging industry. Learn more at Blow mold.
Example work: drinking water bottles, shampoo and cosmetics bottles, engine oil gallons and chemical drums
Strengths: makes hollow containers in a single step, for both small items and large containers
Watch out for: wall thickness distribution, the parting line and a cooling system that helps cut cycle time
Two blow molding processes are widely used: extrusion blow molding, which suits gallons and containers with handles, and stretch blow molding, which is used for clear PET drink bottles. Each mold must be designed to fit the customer's machine, so the team has to understand both the bottle and the production line. See examples at Food Packaging.
4. Casting Molds and Pattern / Core Box
In metal casting, the pattern forms the cavity in the sand mold, while the core box makes the core that forms the hollow spaces inside the part. The accuracy of both directly sets the size of the cast part. Learn more at Patterns and Core Boxes.
Example work: engine parts, pump housings, valves and industrial machine parts
Strengths: makes complex metal parts with internal channels and cuts finishing work after casting
Watch out for: shrinkage allowance for the metal, draft angles and how well the pattern holds up with repeated use
Patterns can be made from wood, resin or metal, depending on how many times they will be used and how fine the part detail is. Metal patterns milled on a CNC machine give high accuracy and a long service life, which suits foundries running high volumes nonstop. See examples at Metal casting.
How SMP Makes Your Mold
Every project follows clear steps, so customers get a mold that works from the very first round.
Brief and part review The customer sends 2D/3D drawings or a sample part, along with the material, production volume and machine to be used.
Mold design Engineers design the structure in SolidWorks and review it with the customer to fix risk points before any steel is cut.
Material selection and production planning We set the steel grade and hardening to match the required service life, and plan the machining in CAM.
Mold part making Turning, milling, wire cutting and polishing on high-precision machines. Learn more at CNC Milling and CNC Turning.
Assembly and mold trial We run real trial production, check part sizes and fine tune until the part meets spec.
Delivery and after-sales support We hand over the mold with usage guidance and stay ready to repair or upgrade it. Learn more at Mold repair and modification.
What Sets the Price and Lifespan of a Mold
Mold price does not depend on size alone. The main factors are part complexity, the number of cavities, internal mechanisms such as slides or lifters, and the steel grade chosen.
A well-designed mold made from the right steel may cost more up front, but it runs longer, breaks down less and costs less per part over time. Regular maintenance, such as cleaning, checking the cooling system and replacing worn parts on schedule, also extends mold life a great deal.
That is why the SMP team helps customers weigh budget against production volume from the quotation stage, so you get the best value mold for your business. Request a quote at Contact us.
Why SMP
SMP handles everything from design to mold delivery within one factory, so customers work with one team for the whole project.
CAD-CAM design: our engineers design molds in SolidWorks and plan machining in CAM, which catches problems before production starts
A base in high-precision turning and milling: besides molds, we also make machine, electronics and automotive parts. This skill keeps our molds true to size. See examples at High-precision parts.
Help choosing the right material: our engineers recommend mold steel and materials that balance service life against budget
Every type in one place: injection, vacuum, blow and casting molds, with no need to hire several makers. See all our services at Our services.
A Thai company near industrial estates: based in Samut Prakan for easy coordination and convenient site visits
Which Mold Should You Choose?
The right mold depends on part shape, material and the volume you need to make. Here is a quick summary:
Mold type | Best for | Part material |
Injection mold | Complex shapes, high volume | Plastic pellets |
Vacuum forming mold | Trays and thin-walled packaging | Plastic sheet |
Blow mold | Bottles and hollow containers | Plastic pellets / preforms |
Pattern / Core Box | Cast metal parts | Cast metal |
If you are not sure which mold suits your part, send your drawing or a sample part to the SMP engineering team for a review. We are ready to advise you from design through to real production. Contact the team at Contact us.


